| #19-01 | Main Housing - right |
$112.80 |
|
| #19-02 | Main Housing - left |
$112.80 |
|
| #19-03 | Dowel Pin |
$0.30 |
|
| #19-04 | Lower Arm Bolt |
$0.60 |
|
| #19-05 | Washer |
$0.21 |
|
| #19-06 | Nut |
$0.21 |
|
| #19-08 | Housing Bolt |
$0.42 |
|
| #19-09 | Adjuster Bolt |
$6.50 |
|
| #19-10 | Spring |
$6.55 |
|
| #19-11 | Cross Trunnion |
$6.68 |
|
| #19-12 | Washer |
$0.17 |
|
| #19-13 | Adjusting Knob |
$10.00 |
|
| #19-14 | Air Pump Cap |
$17.00 |
|
| #19-15 | Bolt |
$0.33 |
|
| #19-16 | Hex Link |
$3.80 |
|
| #19-17 | Hex Link |
$0.15 |
|
| #19-18 | Diaphragm |
$3.60 |
|
| #19-19 | Bolt |
$0.40 |
|
| #19-20 | Hose |
$2.30 |
|
| #19-21 | Air Tube |
$8.00 |
|
| #19-22 | Clip |
$1.50 |
|
| #19-23 | Top Arm |
$44.00 |
|
| #19-24 | Rocker Mount |
$13.10 |
|
| #19-25 | Lower Arm |
$25.80 |
|
| #19-26 | Bolt |
$0.33 |
|
| #19-27 | Bolt |
$0.28 |
|
| #19-29 | Nut |
$0.17 |
|
| #19-30 | Table |
$186.78 |
|
| #19-31 | Trunnion |
$24.80 |
|
| #19-32 | Mounting Bolt |
$0.70 |
|
| #19-33 | Trunnion Support |
$39.92 |
|
| #19-34 | Mounting Bolt |
$0.48 |
|
| #19-36 | Nut |
$0.17 |
|
| #19-37 | Trunnion Lock Bolt |
$5.50 |
|
| #19-38 | Washer |
$0.26 |
|
| #19-39 | Clamp Knob |
$10.00 |
|
| #19-40 | Base |
$39.42 |
|
| #19-41 | Motor Mount |
$26.24 |
|
| #19-42 | Motor Mount Bolt |
$0.48 |
|
| #19-43 | Washer |
$0.16 |
|
| #19-44 | Nut |
$0.42 |
|
| #19-45 | Belt Tension Adjuster |
$5.70 |
|
| #19-46 | Spring Nut |
$0.28 |
|
| #19-47 | Wing Nut |
$0.78 |
|
| #19-48 | Housing Base |
$22.08 |
|
| #19-49 | Bolt |
$0.44 |
|
| #19-50 | Nut |
$0.17 |
|
| #19-51 | Bolt |
$0.48 |
|
| #19-52 | Belt Guard (old style) |
$49.50 |
No Longer available |
| #19-53 | Fastener |
$16.88 |
No Longer available |
| #19-54 | Nut |
$0.30 |
No Longer available |
| #19-55 | Hinge |
$5.60 |
No Longer available |
| #19-56 | Bolt |
$0.28 |
No Longer available |
| #19-57 | Motor Pulley (3-spd) |
$26.38 |
No Longer available |
| #19-58 | Set Screw |
$0.30 |
|
| #19-59 | Saw Pulley (3 spd) |
$28.30 |
No Longer available |
| #19-60 | Crankshaft |
$37.50 |
|
| #19-61 | Main Bearing |
$10.92 |
|
| #19-62 | Connecting Rod |
$14.00 |
|
| #19-63 | Connecting Rod Bearing |
$11.70 |
|
| #19-64 | Linkage Bolt |
$0.90 |
|
| #19-64.1 | Con-Rod & link Bolt Nut |
$0.30 |
|
| #19-64.2 | Connecting Rod Bolt |
$0.90 |
|
| #19-65 | V-Belt |
$14.00 |
|
| #19-66 | Main Rocker |
$19.70 |
|
| #19-67 | Main Bushing |
$6.15 |
|
| #19-68 | Hard Pivot Pin |
$6.24 |
|
| #19-69 | Small Con-Rod Bearing |
$7.32 |
|
| #19-70 | Small Bushing |
$4.20 |
|
| #19-71 | Short Pin |
$6.95 |
|
| #19-71.1 | Washer |
$0.16 |
|
| #19-72 | Lock Bolt 1/4" long |
$0.30 |
|
| #19-72.1 | Lock Bolt 3/8" long |
$0.30 |
|
| #19-72.2 | Lock Bolt 1/2" long |
$0.30 |
|
| #19-73 | Long Pin |
$7.95 |
|
| #19-74 | Rocker Arm (Bushing type) |
$19.40 |
|
| #19-75 | Strut (Bushing Type) |
$7.40 |
|
| #19-76 | Top Linkage (19" or 30") |
$7.32 |
|
| #19-77 | Bottom Linkage (19" or 30") |
$7.80 |
|
| #19-81 | Mount |
$17.90 |
|
| #19-82 | Bar |
$6.30 |
|
| #19-83 | Hold Down |
$9.10 |
|
| #19-84 | Knob |
$3.60 |
|
| #19-85 | Washer |
$0.18 |
|
| #19-86 | Bolt |
$0.60 |
|
| #19-87 | Bolt |
$0.60 |
|
| #19-88 | Front Riser |
$19.80 |
|
| #19-89 | Rear Riser |
$16.70 |
|
| #19-90 | Motor Mount (current) |
$12.60 |
|
| #19-91 | Saw Pulley (current) |
$14.70 |
|
| #19-92 | Motor Pulley (current) |
$17.10 |
|
| #19-93 | Mounting Bolt |
$2.40 |
|
| #19-94 | Mount to Baseplate Bolt |
$0.48 |
|
| #19-95 | Mount to Lower Arm Bolt |
$0.42 |
|
| #19-96 | Belt Guard (current) |
$12.90 |
|
| #19-100 | Front Rocker (current) |
$19.40 |
|
| #19-101 | Strut (current) |
$7.40 |
|
| #19-102 | Front Rocker Mnt (current) |
$19.43 |
|
| #19-103 | Drive Bearing (current) |
$9.25 |
|
| #19-104 | Bearing (current) |
$8.60 |
|
| #19-105 | Bearing Inner Sleeve |
$4.70 |
|
| #19-106 | Brg inner Sleeve -short |
$2.30 |
|
| #19-107 | Blade Chuck (lower) |
$18.00 |
|
| #19-108 | Blade Clamp Knob (W/109) |
$16.50 |
|
| #19-109 | Blade Clamp Swivel Pad |
$4.80 |
|
| #19-110 | "O" Ring (INCLUDED WITH #109) |
$0.00 |
|
| #19-111 | Clamping Set Screw |
$1.20 |
|
| #19-112 | M4 Nut |
$0.30 |
|
| #19-113 | M4X22 Bolt |
$0.60 |
|
| #19-114 | M4X25 Bolt |
$0.60 |
|
| #19-115 | M4X40 Bolt |
$0.60 |
|
| #19-116 | M4 Spring Washer |
$0.30 |
|
| #19-117 | Thrust Washer |
$0.40 |
|
| #19-118 | Inner Sleeve - (drive brg) |
$3.70 |
|
| #19-119 | Quick Tensioner Body |
$21.00 |
|
| #19-120 | Quick Tensioner Clevis |
$11.00 |
|
| #19-121 | Tension Lever (white) |
$12.70 |
|
| #19-122 | Roll Pin |
$0.60 |
|
| #19-123 | Spring |
$0.60 |
|
| #19-124 | Set Screw |
$0.60 |
|
| #19-125 | Con-Rod Bolt (current) |
$0.90 |
|
| #19-126 | Spring Washer |
$0.25 |
|
| #19-127 | Connecting Rod Nut |
$0.35 |
|
| #19-128 | Spacer Tube |
$4.37 |
|
| #19-130 | Drive Link Bushing |
$1.20 |
|
| #19-500 | Grease Fitting (Seyco) |
$12.95 |
|
| #EXNBU | Rocker Arm Upgrade |
$178.90 |
|
| #QCRX | Quick Clamp Repair Kit |
$12.00
|
 |