|
SEYCO'S "FLEX DRUM" SANDER GET INFLATABLE DRUM SANDER RESULTS AT A FRACTION OF THE COST. Use our amazing "FLEX DRUM" sander to shape your INTARSIA projects or any project that calls for shaping or a "Rounded Over" effect. Special design arbor clamps to your 1725 RPM 1/2" or 5/8" motor shaft or use the 1/2" adapter shaft to fit your drill press. 2 3/8" diameter X 7" length. Each "FLEX DRUM" kit comes complete with 2 padded sanding sleeves (1 - 80 grit and 1 - 120 grit). The padded sanding sleeve easily slides onto the arbor with it's grips that prevent slippage.
#DS-01......Kit....$32.95 PADDED REPLACEMENT SLEEVES. Each sleeve comes with pad for $4.95 ea. in 4 grits listed. 80 grit... |
 |
• NEW • Seyco "Mini" Flex Drum Detail Sander Kit
Complete kit includes 4 soft padded sleeves 1-1/4 diameter X 2" Long; Hex "Quick Change" arbor with pad holding screw & washer. Photo at left shows 3 of many ways you can use this small detailing soft drum sander to complement your wood shaping tools.
#DS-05 .............. Complete Kit ................$19.95 plus shipping
PADDED REPLACEMENT SLEEVES ........ $2.95 ea. in 4 grits listed below.
80 grit ... 120 grit ... 180 grit ... 220 grit ...
|
 |
DUAL DRUM SANDING UNIT
Comes completely pre-wired including the worklamp. Base has rubber pad feet and holes for mounting to your workbench or stand. 2 DS-01 Flex Drum kits are included with the 1/3 HP; 120Volt; 1800 RPM motor. Fantastic "wood shaping" assistant! #GWSC-03......(Unit complete with stand).... 264.90 (+ S/H) #GWSC-01.......(Unit without the stand)...... 184.95 (+ S/H) #GWSC-ST............(Stand Only).............. 79.95 (+ S/H) |
 |
These accessories attach directly to the right side shaft to expand the versatility of the Sanding unit!
40” Flexible Shaft with Quick Release Hex chuck & Hex shaft adapter on drive end. #FXQ-40 ........................... 89.95 |
 |
1/2" Keyless Chuck with adapter to 1/2" motor shaft . Split bushing allows clamping to a threaded shaft without set screw damage to the threads!
#KC-5A ............................. 24.95 |
 |
Quick Change Hex Chuck fits 1/2" motor shaft . Split bushing allows clamping to a threaded shaft without set screw damage to the threads!
#IBQ-5A ............................. 29.95 |
 |
Hex adapter fits any 1/4” shaft tools to easily snap them into the quick change chuck .
#IBA-25 ................................ 5.95 |
 |
Taper threaded adapter for all kinds of polishing and sanding/buffing wheels with a 1/8" to 3/8" hole. Complete with Hex Adapter for quick and easy tool changing.
#TMIB-25.............................9.95 |
 |
1/2” wheel arbor -use up to a 2” wide wheel for sanding or polishing . Split bushing allows clamping to a threaded shaft without set screw damage to the threads!
#TSA-5R .............................. 8.95 |
 |
SeeSander - See your work clearly as you remove the precise amount of material necessary to form your desired shape in wood, plastic, metals, etc. or sharpening chisels & cutting tools. Fits your 1/4" or bigger chuck in a drill press, hand drill, or grinder with 3,500 maximum RPM.
STD-06 ...Kit w/3 disk...1- Coarse, 1 - Medium, 1 - Fine Grit & 1 - arbor .... $23.95* MEDIUM - FINE - |
 |
#ADB-03 - AIR
BLOWER EXTENSION. UNIQUE SWIVELING "BALL-JOINT" DESIGN makes this extension the most adjustable design possible. Directs the air from your blower with "Pin-Point" accuracy keeping the pattern line clear of saw dust! Mount this NEW blower extension to any scroll that has the common 1/4" plastic (nylon) tubing used on most scroll saws. 14" overall length with a 1/4" nozzle on one end and 1/8" NPT threads on the other end. The 1/4" tubing will slip snugly into the NPT threaded opening! Mounting straps included. 14 inches long #ADB-03....................................$14.95 (+ S/H) |
#DVA-02...(Attachment only)....$24.95 (+ S/H)